  |
‘@NEW EDGE SEAMER U-2707-E@‘
| |
NEW EDGE-SEAMER U-2707-E IS PRINCIPALLY DESIGNED TO
CONCENTRATE THE HANDINESS, FLEXIBLE MECHANISMS, BUT LOWER COSTING TOTALLY
!!
NEW EDGE-SEAMER IS ACTUALLY RESPONSIBLE TO
THE HIGHLY DEMANDS FROM THE SEWING FACTORIES !!
| JUKI SEWING MACHINE DLU-5490N-7 | Machine head is single needle lock-stitch with "Drop & Varialble
Feed" performs "Low vibration","Silence" and promises
"High Productivities","Reliability" for the sewing. With the latest designing, "Drop & Variable Feeding" allows the consistent sewing against the different fabrics, and supports the operator's skilless. High quality and lower cost performance supports the machining step up ! |
| HIGH FLEXIBILITY TO THE FABRIC VARIATION | Reasonable top-feeding synchronized with drop-feeding, partial-gathering
equipment(PF-6) various attachments, support the beginner's operatio nsimply. With high presser-foot up, internaized top-feeding, fabric loading, handling is allowed easily. Stitching-pitch dial is very variable and handiness to the operators. |
| LCD TOUCH PANEL DISPLAY | LCD touch panel displays sewing modes variation flexibly. Edge-guide crossing, T.B.D., bobbin balance countinger, stacking, etc are allowed on the LCD touch panel freely. |
| ORIGINALLY DESIGNED CROSSING EDGE-GUIDE |
Originally designed crossing edge-guide crosses back and waits at the backside
to make hand-working easily when sewing starts. Wiith edge-guide switch on, edge-guide advnces and clamps top and bottom fabric closes instantly. When sewing ends, edge-guide opens and back to home position. With guide switch ON/OFF, guide is allowed to go back, to advance on the half way. When hand working is no need, edge-guide advsnces and detains top-bottom fabric clamping. YUHO original edge-guide allows to correspond to the fabric materials, thickness variation. |
| TWIN FOOT PEDALS PERFORMANCE | With E-motor, sewing high speed, inching low speed are allowed to set on
separately. Twin pedals allow to make sewing stop on the halfway, low-speed on the sewing start, high-speed and low speed on the half way, or labelling and high speed starts again supports high-sewing variation, productivities. |
| YUHO MOUSE SUPPORTS OVRER-LAPPERD WORKING | With originally designed mouse, fabric is guided accurately, smoothly. Mouse promises free from seam fail and supports overlapped working together with table air feeding. |
| NEW CLAMPING BAR STACKER | After thread trimming, fabric is stacked completely, automatically with
the clamping bar stacker. New clamping bar stacker allows to load the next fabric and over-lapped working. |
@
| MAIN DEVICES | @@Originally desined crossing edge-guide @@Low/High speed pedal @@Original mouse @@Stacker with the clamping bar @@Bobbin winder@<OPTION> @@LCD touch panel @@T.B.D.@<OPTION> @@Air gun @@Caster with braker |
|---|---|